VAG/VW Error Code 16352 – ABS Control Module? Remanufacturing is guaranteed to be the solution!

An error code usually gives a good indication of the source of the malfunction, but in many cases you are not immediately sure which part or component is defective. Normally we are quite reserved in taking conclusion on these error codes. However, this is a special case, because thanks to our renewed remanufacturing method we can now say with certainty that VAG error code 16352 in combination with the ATE MK61 ABS can always be solved by remanufacturing!

We often see this error code in, for example:

Audi A3 8P 2003-2012

Audi TT 8N 1998-2006

Volkswagen Golf MK5 1K_ 2003-2009

Error code 16352 symptoms

As soon as there are problems in the ABS unit and error code 16352 is triggered because the system fails in certain cases, this will of course be reflected by an illuminated ABS or ESP light. It will remain lit until the error is resolved. A malfunctioning ABS system can of course lead to dangerous situations.

Causes of error code 16352

There can be several triggers that cause error code 16352. However, the possible causes are all in the ABS unit. As the error code description suggests, the most likely problem is the control unit (the ABS ECU).

icon-check-mark Our advice for the 16352 Control Module error code

If you also have a car from the VAG group in your workshop that is equipped with the ATE MK61 ABS unit produced from 2005 that causes error code 16352, send it in to ACtronics. Thanks to our years of experience, we know all the ins and outs of this part. For error code 16352, we have a specific remanufacturing process that ensures that the issue is solved. All defective components on the printed circuit board (and possibly in the rest of the ABS unit) are replaced. In addition, a number of other components are replaced preventively, because we know from experience that they will fail in the long run. By opting for remanufacturing you pay a fraction of the new price and you do not have to program the part.

Send your part to us by going to the product page. If you have any questions about this error code, please do not hesitate to contact our product experts. They are happy to help you!