ATE MK26 ESP ABS-units

Common problems

  • Malfunction on pump motors
  • Pressure sensor problem

How we work

We remanufacture the part you send. Prices are exclusive of VAT and possible shipping costs. Offer only applies to garages and dealers and not to individuals.

Professional remanufacturing
15+ years of experience
24 month warranty
Qualitative alternative
Technical support
Affordable pricing

Customer reviews

This is what others say about us

Repair an ATE MK26 ESP?

Would you like to remanufacture an ATE MK26 ESP (for a Volkswagen, Nissan or Mercedes)? ACtronics will be able to help you. We offer a wide range of remanufacture solutions for different fault types in various ESP unit. For example, the MCU 4 ESP another ATE unit with ESP functionality or models made by Bosch like the Bosch 8 ESP and the Bosch 9 ESP.  Please note that fault codes and defects can differ by brand and model.

Possible defects and fault codes in an ATE MK26

When the ESP system is working properly, the ATE MK26 ESP will keep the car stable on the road. As soon as a fault occurs, this safety system can fail. The driver will notice that the ABS/ESP warning light illuminates. Faults in the ESP unit can, in certain cases, cause problems during braking. It is possible to feel a continuous vibration in the brake pedal or it might take more than normal effort to press the brake pedal.

Many of the faults that occur with the ATE MK26 ESP are related to the pressure sensors. Usually these sensors intermittently stop operating, but total failure can occurs as well. In addition to the pressure sensors, a number of faults are caused by a not proper operating pump motor. The ABS pump motor normally ensures pressure build up in the braking system, so if it stops functioning, it can cause serious problems. Last we have to list the PCB of the ABS-unit as a failure in these is fairly common.

Remanufacture of the ATE MK26 ESP

The remanufacture process of an ABS unit has a number of steps: an entry test, the remanufacture and an end-of-line test. During these three steps, we make sure that the unit will operate again as it should. For example, during the entry test, we check if our results correspond to the listed complaints. All known weak components are preventively replaced. During the end-of-line test, we check if the ABS-unit is actually fully functional again. Important note: for the proper testing of the unit we need a good diagnosis. Please do this carefully. It would be a waste of time and money to send an ABS unit to be remanufactured only to find that the unit is not defective at all.

Remanufacture an ABS-unit by ACtronics?

Would you like to have an ATE MK26 ESP or other ABS module remanufactured? You can create a remanufacture request quickly and easily on our website. ACtronics has an extensive range of ABS units from well-known brands and models like: ATE MK20 or Bosch 8 ESP

Would you like to have a product remanufactured that cannot be found on the website? Please contact our customer services to discuss the possibilities.

OEM number